HP Array Configuration Utility 86
HBA category
The HBA category has the following options:
• ConnectionName (on page 86)
• HBA_WW_ID (on page 86)
• HostMode (on page 86)
ConnectionName
This option is a user-defined string used as the connection name for the specified HBA.
The string can consist of:
• A maximum of 16 characters
• Embedded space characters but cannot end with a space character
• Any of the following characters: a–z, A–Z, 0–9, !, @, #, *, (, ), -, _, +, :, ., /, and [space]
HBA_WW_ID
This option specifies which HBA, based on its assigned WWN, is modified by the configuration changes.
HostMode
This option specifies the HostMode for a selected HBA. Setting the Host Mode optimizes the storage array
for the selected operating system. The available host modes for an HBA are device-specific. Not all
modes are available on all devices. Not all HBAs support a HostMode.
The following operating system options might be available:
• Default
• Microsoft® Windows®
• OpenVMS
• Tru64
• Linux
• Solaris
• Netware
• HP-UX
ACU scripting warning messages
Warning
code
Warning message Comment or clarification
4000 License key is already installed
The input file specified a license key. However,
a license key is already installed on the
controller.
4001
Clear configuration command failed -
configuration is already cleared
The -reset option was used on a controller
that does not have a configuration
To Next Page
Loading...
