c. Pull the suction cups away from each other to slightly separate the panel (2) from the display
rear cover.
d. Place suction cups (1) on the front and back of the left side of the display.
e. Pull the suction cups away from each other to slightly separate the panel (2) from the display
rear cover.
f. On the top left and right sides of the display panel, use tweezers to grasp the ends of the
stretchable tape that is installed under the panel.
g. While turning the tweezers (1), wrap the tape around the tweezers as you continue to pull the
tape (2) out from behind the display panel.
50
Chapter 5 Removal and replacement procedures for authorized service provider parts
To Next Page
Loading...
