EasyManua.ls Logo

HP 17-cn0 Series - Solid-State Drive Specifications

HP 17-cn0 Series
89 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Table 9-2 Display specications
Metric U.S.
Active diagonal size 43.9 cm 17.3 in
Resolution 1920 × 1080 (FHD)
1600 × 900 (HD+)
Surface treatment Antiglare
BrightView
Brightness 250 nits
Viewing angle UWVA (FHD panels)
SVA (HD+ panels)
Backlight LED
Display panel interface eDP
Solid-state drive specications
This section provides specications for your solid-state drives.
Table 9-3 Solid-state drive specications
128 GB* 256 GB* 512 GB* 1 TB*
Dimensions
Height 1.0 mm 1.0 mm 1.0 mm 1.0 mm
Length 50.8 mm 50.8 mm 50.8 mm 50.8 mm
Width 28.9 mm 28.9 mm 28.9 mm 28.9 mm
Weight < 10 g < 10 g < 10 g < 10 g
Interface type PCIe PCIe PCIe PCIe
Ready time, maximum (to not busy) 1.0 ms 1.0 ms < 1.0 ms 1.0 ms
Access times, logical 1.0 ms 0.1 ms 0.1 ms 0.1 ms
Transfer rate
Sequential read up to 2150 MB/s up to 2150 MB/s up to 2150 MB/s up to 2150 MB/s
Random read Up to 300,000
IOPs
Up to 300,000
IOPs
Up to 300,000 IOPs Up to 300,000 IOPs
Sequential write up to 1550 MB/s up to 1550 MB/s up to 1550 MB/s up to 1550 MB/s
Random write Up to 100,000
IOPs
Up to 100,000
IOPs
Up to 100,000 IOPs Up to 100,000 IOPs
Total logical sectors 234,441,648 468,883,296 1,000,215,216 1,500,336,388
Operating temperature 0°C to 70°C (32°F to 158°F)
74 Chapter 9 Specications

Table of Contents

Related product manuals