HP 1910 Series Getting Started Guide

1
Appendix B Technical specifications
Table 5 Technical specifications
Item 1910-8 1910-24 1910-48 1910-8-PoE+ 1910-24-PoE+
Dimensions (H
× W × D)
44 × 266 ×
162 mm (1.73
× 10.47 × 6.38
in)
44 × 440 ×
173 mm (1.73
× 17.32 × 6.81
in)
44 × 440 ×
173 mm (1.73
× 17.32 × 6.81
in)
44 × 330 ×
230 mm (1.73
× 12.99 × 9.06
in)
44 × 440 ×
238 mm (1.73
× 17.32 × 9.37
in)
Weight ≤ 1 kg (2.20 lb)
≤ 2.2 kg (4.85
lb)
≤ 2.3 kg (5.07
lb)
≤ 2.1 kg (4.63
lb)
≤ 3.3 kg (7.28
lb)
Management
port
One console port
Ethernet port
Eight
10/100-Mbps
auto-sensing
Ethernet ports
and two GE
combo
interfaces
24 ×
10/100-Mbps
auto-sensing
Ethernet ports
and two GE
combo
interfaces
48 ×
10/100-Mbps
auto-sensing
Ethernet ports,
two
10/100/1000-
Mbps
auto-sensing
Ethernet ports,
and two GE
fiber ports
Eight
10/100-Mbps
auto-sensing
Ethernet ports
and two GE
combo
interfaces
24 ×
10/100-Mbps
auto-sensing
Ethernet ports
and two GE
combo
interfaces
Input AC
voltage
Rated voltage range: 100 VAC to 240 VAC @ 50 Hz or 60Hz
Power
consumption
(full
configuration)
8 W 12 W 22 W
A single PoE
port provides
power
consumption up
to 30 W and the
switch provides
up to 65 W for
PoE
port-connected
devices in total.
The overall
power
consumption of
the switch is 90
W.
A single PoE
port provides
power
consumption up
to 30 W and the
switch provides
up to 180 W for
PoE
port-connected
devices in total.
The overall
power
consumption of
the switch is
220 W.
Operating
temperature
0°C to 40°C (32°F to 104°F)
Relative
humidity
5% to 95%, noncondensing
Cooling
system
No fans for heat ventilation
Two fans for
heat ventilation

HP 1910 Series Specifications

General

PoE Support	No
Type	Managed
VLAN Support	Yes
MAC Address Table Size	8192 entries
Jumbo Frame Support	Yes
Operating Temperature	0°C to 45°C (32°F to 113°F)
Operating Humidity	10% to 90% (noncondensing)
Uplink Ports	4 x SFP