HP 250 - Page 177

Error Messages
803 Cannot duplicate media
810 Protect code parameter must be 2 characters long.
850 Bad file-type specifier
851 Files not similar
860 Old password does not match
861 Improper number of array elements.
999 Binary program not compatible with current operating system
revision.
System Errors
1000. System Files table full;
in the system.
There are too many active files
1001. Too many accesses to specified file: There are more than
15 concurrent addresses to the same file. Must de-assign
some mass memory files.
1002. Request would result in deadlock: You are requesting a
resource that, if granted, would deadlock the system.
1003. Cannot get exclusive access to specified device.
1004. Keyword not recognized by this operating system revision.
1005. Memory overflow in common block.
1010. Memory parity error: Hardware failure in memory. May be a
temporary condition. If error reoccurs, record the numbers
following the error number on the display, and contact HP
for assistance.
Some system malfunctions are denoted by an error-like message on
the display. These messages will appear as the words "SYSTEM
ERROR". In addition, a table of numbers is listed. If a
condition of this type occurs, you should record the system error
letter and the message and table shown on the display. You must
power off the system and then power it up after these errors.
E-16
Error Messages
803 Cannot duplicate media
810 Protect code parameter must be 2 characters long.
850 Bad file-type specifier
851 Files not similar
860 Old password does not match
861 Improper number of array elements.
999 Binary program not compatible with current operating system
revision.
System Errors
1000. System Files table full;
in the system.
There are too many active files
1001. Too many accesses to specified file: There are more than
15 concurrent addresses to the same file. Must de-assign
some mass memory files.
1002. Request would result in deadlock: You are requesting a
resource that, if granted, would deadlock the system.
1003. Cannot get exclusive access to specified device.
1004. Keyword not recognized by this operating system revision.
1005. Memory overflow in common block.
1010. Memory parity error: Hardware failure in memory. May be a
temporary condition. If error reoccurs, record the numbers
following the error number on the display, and contact HP
for assistance.
Some system malfunctions are denoted by an error-like message on
the display. These messages will appear as the words "SYSTEM
ERROR". In addition, a table of numbers is listed. If a
condition of this type occurs, you should record the system error
letter and the message and table shown on the display. You must
power off the system and then power it up after these errors.
E-16