HP 250 - Using the HP 7906

Storage Devices and Media
Using the HP 7906
You should observe the following precautions when operating the
disc drive:
• Do not place magnetic media on top of the disc drive.
• Observe all warning and caution labels affixed to the disc
drive.
• In normal operation the heads "fly" over the disc surfaces on
a thin cushion of air. Dust or other contaminants between
the head and the disc can cause the head to contact the disc
and possibly damage the disc and/or head. Operate the disc
drive in a clean area to minimize the chance of this
malfunction occurring.
• If head and disc contact should occur as described above, do
not attempt to retrieve data by placing the potentially
damaged disc cartridge in another drive. Also, do not place
another disc cartridge in this drive until the drive and disc
cartridge have been checked by service-trained personnel.
WARNING
The disc drive does not contain operator-
serviceable parts. To prevent electrical
shock, refer all installation and mainten-
ance activities to service-trained
personnel.
The following paragraphs provide the basic operating procedures
for the disc drive. Included is a procedure for startup,
changing a disc cartridge, shutdown, and responding to disc drive
faults. '
5-10
Storage Devices and Media
Using the HP 7906
You should observe the following precautions when operating the
disc drive:
• Do not place magnetic media on top of the disc drive.
• Observe all warning and caution labels affixed to the disc
drive.
• In normal operation the heads "fly" over the disc surfaces on
a thin cushion of air. Dust or other contaminants between
the head and the disc can cause the head to contact the disc
and possibly damage the disc and/or head. Operate the disc
drive in a clean area to minimize the chance of this
malfunction occurring.
• If head and disc contact should occur as described above, do
not attempt to retrieve data by placing the potentially
damaged disc cartridge in another drive. Also, do not place
another disc cartridge in this drive until the drive and disc
cartridge have been checked by service-trained personnel.
WARNING
The disc drive does not contain operator-
serviceable parts. To prevent electrical
shock, refer all installation and mainten-
ance activities to service-trained
personnel.
The following paragraphs provide the basic operating procedures
for the disc drive. Included is a procedure for startup,
changing a disc cartridge, shutdown, and responding to disc drive
faults. '
5-10