HP 2530 SERIES User Manual

1-1
1
Introducing the Switch
The HP 2530 Switch Series are multiport switches that can be used to build
high-performance switched workgroup networks. These switches are store-
and-forward devices that offer low latency for high-speed networking. These
switches also support the IEEE 802.3at standard for providing PoE+ power
to connected devices.
Throughout this manual, these switches will be referred to as the 2530-24G-
2SFP+, 2530-48G-2SFP+, 2530-24G-PoE+-2SFP+, 2530-48G-PoE+-2SFP+.
■ The 2530-24G-2SFP+ and 2530-24G-PoE+-2SFP+ switches have 24 auto-
sensing 10/100/1000BASE-T RJ-45 ports, and two SFP+ slots for supported
HP SFP and SFP+ transceivers (ports 25-26).
HP 2530-24G-PoE+-2SFP+ Switch (J9854A)
HP 2530-48G-PoE+-2SFP+ Switch (J9853A)
HP 2530-24G-2SFP+ Switch (J9856A)
HP 2530-48G-2SFP+ Switch (J9855A)

HP 2530 SERIES Specifications

General

Model	HP 2530 Series
Category	Network Switch
Ports	8, 24, or 48 ports
Routing Protocol	Static routes
Management	Web interface, CLI, SNMP
Power Supply	Internal
PoE	Available on some models
Jumbo Frame Support	Yes
VLAN Support	Yes
Security Features	Port security, 802.1X
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0°C to 45°C