Safety Considerations
WARNINGs, CAUTIONs, and Notes
WARNINGS, CAUTIONS
and
Notes are used in this manual
to
alert
users
to
important
situations.
They
are used as follows:
• WARNINGS contain information which, if not observed, could re-
sult in injury
to
personnel or loss of life.
• CAUTIONS contain information which if not observed, could re-
sult in damage
to
or
destruction of equipment.
• Notes contain information
that
will assist you in accomplishing
the
job.
WARNING
The power supply is hazardous to personnel. Ex-
treme care must be taken when connecting volt-
meter probes to the test points. Turn off the unit
and remove the power cord before connecting or
removing test probes.
CAUTION
Integrated circuits on PC boards are susceptible
to damage
by
electro-static discharge. Extreme
care must be taken when handling printed circuit
boards.
Use an Anti-static Workstation.
Note
Hewlett-Packard supports field repair of these
products only
to
the
board
or assembly level.
Component level information and repair
is
not
within
the
scope of this manuaL nor available.
vi Notices
To Next Page
Loading...
