HP StorageWorks 1000 Modular Smart Array installation guide 33
3. Install the rails in the rack:
a. Identify the left (L) and right (R) rack rails by markings stamped into the rails.
b. Insert the front end of one of the rack rails into the inside front of the rack until the pins extend
through the holes marked during the rack template procedure.
NOTE: Be sure that the scissor-type locking latch engages when the end of the rail seats into
the rack uprights.
c. Extend the back end of the rail toward the inside rear of the rack until the pins extend
through the holes marked during the rack template procedure and the locking latch engages.
15411
15424
To Next Page
Loading...
