HP StorageWorks 1000 Modular Smart Array installation guide 53
Verify the operating status of the Fibre Channel switches
To verify that your switches are operating properly, view the switch LEDs and compare them with the
patterns described in the documentation for these devices.
If the LEDs indicate a fault, see the documentation that came with the switch for help.
Verify the operating status of the servers
Although the MSA is not yet visible to the server, verify that the server is operating properly. A
simple test is to verify that your operating system loaded and then open a software application or
your browser.
If your server is not operating properly, see the documentation that came with the server for help.
To Next Page
Loading...
