HP 353803-B22 - StorageWorks Modular Smart Array 1000 SAN Starter User Manual

HP StorageWorks 1000 Modular Smart Array installation guide 97
CAUTION: If the servers are being restarted after the installation of the HBA, the monitor
may display a “New Hardware Found” message and prompt to install an HBA driver.
Cancel out of this window to prevent the installation of an unsupported HBA driver. The
required drivers are provided on the MSA1000/1500 Support Software CD, shipped with
the device and available on the MSA websites.
8. Verify that each device in the SAN is operating properly.

HP 353803-B22 - StorageWorks Modular Smart Array 1000 SAN Starter Specifications

General

Brand	HP
Model	353803-B22 - StorageWorks Modular Smart Array 1000 SAN Starter
Category	Disk array system
Language	English