Table 10 Fibre Channel adapter port LEDs (continued)
IndicatesAppearanceLEDCallout
4 fast blinks – Connected at 8GB/sec.
On – Normal/Connected - link upGreenLink status2
Flashing – Link down or not connected
Converged Network Adapter Port LEDs
The CNA in the controller node includes two ports, each has a Link and Activity LED.
NOTE: The top port (on the far right in the illustration) corresponds with the first set of LEDs
(directly below the second port) and the second port corresponds with the second set of LEDs (the
far left in the illustration) on the bottom of the adapter.
Figure 23 CNA 2–port LEDs
Table 11 CNA port LEDs
IndicatesAppearanceLEDCallout
Off – Link downGreenLink1
On – Link up
Off – No activityGreenACT (Activity)2
On – Activity
Controller Node and Internal Component LEDs 25
To Next Page
Loading...
