Removing a 2.5 inch Disk
1. Pinch the handle latch to release the handle into open position.
2. Pull the handle away from the enclosure and wait 30 seconds.
3. Gently slide the disk drive out of the enclosure and set aside.
4. Remove the replacement disk drive from its packaging. To reinstall a new disk drive, see
“Installing a Disk Drive” (page 13).
Figure 6 Removing a 2.5 inch disk drive
Figure 7 (page 11) shows the installation order for disk drives in an SFF drive enclosure.
Figure 7 SFF Drive Enclosure Installation Order
Removing a 3.5 inch Disk
To remove a 3.5 inch disk drive:
1. Pinch the latch in the handle towards the hinge to release the handle.
2. Gently pull the disk drive one inch and wait 30 seconds.
3. Slide the disk drive out of the enclosure and set aside.
4. To reinstall a new disk drive, see “Installing a Disk Drive” (page 13).
Disk Drive Repair 11
To Next Page
Loading...
