11-6 Inference aplet
Open Inference
aplet
6. Open the Inference aplet and clear current settings.
Select
Inference
Select inference
method and
type
7. Select an inference method.
Select CONF INTERVAL
8. Select a distribution statistic type.
Select T-Int: 1 μ
Set up the
interval
calculation
9. Set up the interval calculation. Note: The default
values are derived from sample data from the on-line
help example.
Setup-NUM
hp40g+.book Page 6 Friday, December 9, 2005 12:27 AM
To Next Page
Loading...
