Programming 21-25
REPLACE Replaces portion of a matrix or vector stored in name with
an object starting at position start. start for a matrix is a
list containing two numbers; for a vector, it is a single
number. Replace also works with lists and graphics.
REPLACE name;start;object:
SCALE Multiplies the specified row_number of the specified
matrix by value.
SCALE name;value;rownumber:
SCALEADD Multiplies the row of the matrix name by value, then adds
this result to the second specified row.
SCALEADD name;value;row1;row2:
SUB Extracts a sub-object—a portion of a list, matrix, or
graphic from object—and stores it into name. start and
end are each specified using a list with two numbers for
a matrix, a number for vector or lists, or an ordered pair,
(X,Y), for graphics.
SUB name;object;start;end:
SWAPCOL Swaps Columns. Exchanges column1 and column2 of the
specified matrix.
SWAPCOL name;column1;column2:
SWAPROW Swap Rows. Exchanges row1 and row2 in the specified
matrix.
SWAPROW name;row1;row2:
Print commands
These commands print to an HP infrared printer, for
example the HP 82240B printer.
PRDISPLAY Prints the contents of the display.
PRDISPLAY:
PRHISTORY Prints all objects in the history.
PRHISTORY:
hp40g+.book Page 25 Friday, December 9, 2005 12:27 AM
To Next Page
Loading...
