1-18 Getting started
Note view Press NOTE to display the aplet’s note view.
This note is transferred with
the aplet if it is sent to
another calculator or to a
PC. A note view contains text
to supplement an aplet.
See “Notes and sketches” on page 20-1 for further
information.
Sketch view Press SKETCH to display the aplet’s sketch view.
Displays pictures to
supplement an aplet.
See “Notes and sketches” on
page 20-1 for further
information.
Aplet view configuration
You use the SETUP keys ( , and
) to configure the aplet. For example, press
SETUP-PLOT ( ) to display the input form for
setting the aplet’s plot settings. Angle measure is
controlled using the
MODES view.
Plot Setup Press SETUP-PLOT.
Sets parameters to plot a
graph.
Numeric Setup Press SETUP-NUM. Sets
parameters for building a
table of numeric values.
Symbolic Setup This view is only available in
the Statistics aplet in
mode, where it plays an
important role in choosing
data models.
Press
SETUP-SYMB.
hp40g+.book Page 18 Friday, December 9, 2005 12:27 AM
To Next Page
Loading...
