Installing Printers on Clients
Links within this document:
Installing Printers on Microsoft Clients (the Microsoft Point and Print feature)
Bypassing Point and Print
Configuring Printing for UNIX Clients
Links to related documents:
Troubleshooting the Appliance
Installing printers on each client computer is required in order for clients to be able to print using the appliance.
Note: Hewlett-Packard recommends verifying installation with one client computer before configuring more
clients. This will confirm operation. It is easier to troubleshoot settings on one client computer than on many.
Installing Printers on Microsoft Clients (the Microsoft Point
and Print feature)
Use one of the following procedures to install printers on each client computer (this feature is only supported on
an x86 PC running Microsoft Windows 9x, ME, NT, 2K, or XP):
Check the following:
The appliance is installed on the network and properly configured.
❍
Each client workstation is connected to the network.❍
The printers are set up and turned on.❍
1.
On the client workstation, click Tools in Microsoft's Explorer and select "Find… Computer". Enter the
name or IP address of the appliance. Or, find the appliance in the Network Neighborhood.
2.
Open the Printers folder.3.
To Next Page
Loading...
