Backing Up, Restoring, Reseting, Rebooting, and Upgrading
the Appliance
Links within this document:
Backing Up Network Settings and Printer Information
Restoring Network Settings and Printer Information (Using the Web Interface)
Resetting the Appliance to Factory Defaults (Using the Front Panel)
Rebooting (or Restarting) the Appliance
Upgrading the Firmware on the Appliance
Links to related documents:
Troubleshooting the Appliance
Backing Up Network Settings and Printer Information
Saving the configuration parameters makes it easy to restore those parameters if the appliance must be replaced
or if its configuration values are accidentally changed or lost. Use the Backup Settings page to save the
following configuration parameters:
administrator account usernames and passwords
●
network settings●
printer information●
printer drivers●
Use the following procedure to save the configuration parameters:
On the menu under Backup/Restore, select Backup Settings.1.
Click
to begin the process. A File Download window appears.2.
At the next screen, click Save This File to Disk and click
. A Save As dialog box appears.3.
To Next Page
Loading...
