Invalid Subnet Mask
The subnet mask must be in the format
xxx.xxx.xxx.xxx.
Subnet masks are written as four numbers separated
by periods, where the first number is between 1 and
255 and the other three numbers are between 0 and
255. Subnet masks must be well formed to match
your network.
Retype the subnet mask in the format
xxx.xxx.xxx.xxx.
Invalid Gateway Address
The gateway address must be in the format
xxx.xxx.xxx.xxx. If the gateway address is unknown,
use the appliance's IP address.
Gateway addresses are written as four numbers
separated by periods, where the first number is
between 1 and 255 and the other three numbers are
between 0 and 255. Retype the gateway address in
the format xxx.xxx.xxx.xxx. If the address is
unknown, use the appliance's IP address.
Invalid DNS Server Address
The DNS server address address must be in the format
xxx.xxx.xxx.xxx.
Retype the DNS server address in the
xxx.xxx.xxx.xxx format.
Note: This must be the DNS server's IP address, not
its friendly name. If the network does not have a
DNS server, leave this field blank.
Invalid Domain Name
The DNS Domain Name must be alphanumeric with
no spaces. Dashes (-) and periods (.) are acceptable.
Retype the DNS Domain Name. Use only
alphanumeric characters with no spaces. Dashes ( - )
and periods ( . ) are acceptable.
Restarting network, please wait
You network settings have been updated
Confirmation message.
Microsoft Networking Settings Page
Message Explanation / Remedy
Invalid Appliance Name
The appliance name must be alphanumeric. Dashes (-)
are acceptable. It can be up to 12 characters long.
Retype the appliance name.
Invalid WINS Server Address (wins address)
The WINS server address must be in the format
xxx.xxx.xxx.xxx.
WINS server addresses are written as four numbers
separated by periods, where the first number is
between 1 and 255 and the other three numbers are
between 0 and 255. Retype the WINS server address
in the format xxx.xxx.xxx.xxx.
Invalid Workgroup Name (workgroup) The workgroup name entered is not valid. Retype
the workgroup name.
Invalid Domain Controller
Domain controller names must be alphanumeric with
no spaces. Dashes (-) and periods (.) are acceptable.
Retype the Domain Controller Name, using only
alphanumeric characters with no spaces. Dashes ( - )
and periods ( . ) are acceptable.
You must specify your domain administrator name
and password to join the NT domain.
Specify the Domain Administrator Name and
Domain Administrator Password.
Your Microsoft networking settings have been updated Confirmation message
To Next Page
Loading...
