To Next PageTo Next Page
Need help?Do you have a question about the HP 4934A and is the answer not in the manual?
General| Brand | HP |
|---|---|
| Model | 4934A |
| Category | Measuring Instruments |
| Language | English |
Overview of the manual and instrument usage.
Instructions for powering on the instrument and its initial self-test.
Description of the instrument's controls, buttons, and indicators.
Step-by-step guides for basic measurements and instrument operation.
Lists and explains error codes displayed by the instrument.
Steps for connecting the instrument to a test circuit and initial configuration.
Explains how to dial up lines and hold connections using the instrument.
Procedure for using a butt-in to dial and communicate on a line.
Steps to receive calls and seize lines for testing.
Details on measuring signal level and frequency, including loss and attenuation.
Principles and measurement of background noise with band limiting filters.
Quantifies total noise including background noise and noise with a signal.
Determines the ratio of received signal plus-noise power to noise power.
Detects and counts noise spikes like clicks and pops on a telephone line.
Measures combined effect of impairments on a data signal (Peak to Average Ratio).
Determines longitudinal (common mode) noise present on a circuit.
Introduces the manual's scope and the instrument.
Details manual applicability, software versions, and contact information.
Crucial safety precautions for operation, service, and repair.
Explains symbols used on the instrument and in the manual for safety.
Details compliance with safety standards and EMC directives.
Explains how serial numbers relate to manual content and supplements.
Lists optional accessories and features for the HP 4934A.
Detailed technical specifications and performance parameters of the instrument.
Provides installation instructions for the instrument and accessories.
Procedure for inspecting the instrument and shipping container for damage.
Precautions to follow before switching on the instrument.
Instructions for connecting power, handling the fuse, and installing the battery.
Guidelines for temperature, humidity, altitude, and cleaning the instrument.
Recommendations for storing, shipping, and repackaging the instrument.
Overview of the chapter's procedures for testing instrument performance.
Lists the test equipment required for performance verification.
Tests to quickly establish >90% confidence in instrument performance.
Tests to ensure the instrument operates to its full warranted specification.
Information on instrument maintenance and calibration intervals.
Describes how to download new operating software to the 4934A TIMS using a PC.
Step-by-step guide for connecting a PC and downloading software.
Details the DOWNLOAD.EXE program and its command-line variables.
Explains how the 4934A TIMS can be controlled remotely via its RS-232 serial port.
Details the physical serial port and its communication parameters.
Shows pinouts for straight-through and null modem serial cables.
Instructions for connecting to a controller and configuring baud rate.
Lists commands to control instrument operation remotely.
Lists commands to retrieve measurements and data from the instrument.
Explains responses to out-of-range values entered via remote commands.
Details the performance testing procedures for the SA1 accessory.
Lists the specifications for the SA1 amplifier/filter.
Lists the test equipment needed for SA1 performance tests.
Step-by-step instructions for testing the SA1 accessory.
Details the performance testing procedures for the SA2 accessory.
Lists the specifications for the SA2 power splitter/adder.
Lists the test equipment needed for SA2 performance tests.
Step-by-step instructions for testing the SA2 accessory.
