HP 4934A - Service Accessory 1 (SA1) 20 dB Amplifier;4 kHz Filter; Performance Test; Specifications; Equipment Required

A
Service Accessory 1 (SA1)
20 dB Amplifier/4 kHz Filter
Performance Test
SPECIFICATION
Unity Gain with Flat Filter : 0 dB ± 1.5 dB from 20 Hz to 85 kHz
20 dB Gain with Flat Filter : 20 dB ± 1.5 dB from 20 Hz to 85 kHz
4 kHz Filter : Rejection at 10 kHz is greater than 10 dB
EQUIPMENT
AC Calibrator
AC Voltmeter
Dual Output DC Power Supply
PROCEDURE
CAUTION Ensure that the AC Calibrator OUTPUT is switched off or set to the minimum level
before proceeding with the following procedure.
1 Connect the equipment as shown in the following figure:
AC CAIJBFMTOR SA1 AC VOLTMETER
DATRON 4707A
HP 3456A
HP 6234A
Service Accessory 1 (SA1) A-1
20 dB Ampllfier/4 kHz Filter