HP 4934A - Receiver Level

Receiver Level
1 Connect the HP 4934A TRMT port to the RCV port.
2 Set the HP 4934A as follows:
Measurement
Transmitter (TRMT) Impedance
Receiver (RCV) Impedance
Display Mode
Transmitter Level/Frequency
: LEVEL FREQ
:600a
: 6000
:TRMT
: 0 dBm/1004 Hz
3 Set the Display Mode to RCV. Check the displayed level is between -0.2 and +0.2
dBm.
4 Set the transmitter level to -19 dBm (Display Mode - TRMT).
5 Check that the received level (Display Mode - RCV) reading is between -19.2
and -18.8 dBm.
Performance Tests 5-5