HP 4934A - Page 64

instrument is being returned to Hewlett-Packard for servicing,
attach a tag indicating the type of service required, return
address, model number and full serial number. Also mark the
container “FRAGILE” to ensure careful handling.
Other Packaging The following general instructions should be used for repacking
with commercially available materials:
a Wrap instrument in heavy paper or plastic. (If shipping to
Hewlett-Packard office or service center, attach a tag indicat¬
ing type of service required, return address, model number
and full serial number.)
b Use strong shipping container. A double-walled carton of 35-
poimd test material is adequate.
c Use a layer of shock absorbing material 70 to 100 mm (3 to 4
inch) thick around all sides of the instrument to provide firm
cushioning and prevent movement inside the container. Pro¬
tect the control panel with the front cover provided or with
cardboard.
d Seal shipping container securely.
e Mark the shipping container clearly.
f In any correspondence, refer to instrument by model number
and full serial number.
4-6 Installation