HP 5130 EI Switch Series User Manual

6
Installing the switch
CAUTION:
Keep the tamper
-
proof seal on a mounting screw on the chassis cover intact, and if you want to open the
chassis, contact HP for permission. Otherwise, HP shall not be liable for any consequence.
Figure 1 Hardware installation flow
Installing the switch in a 19-inch rack
Mounting brackets
Table 4 describes the mounting brackets provided with the switch.
Start
Install the switch
Connect the grounding
cable
Connect the power cords
Verify the installation
Turn on the circuit breaker
Operating correctly?
Turn off the
circuit breaker
Troubleshoot
the switch
No
End
Has power supply slots?
Yes
Select and install power
supplies
Yes
No

HP 5130 EI Switch Series Specifications

General

Brand	HP
Model	5130 EI Switch Series
Category	Switch
Language	English