54
Table 25 1/10GBase-T autosensing Ethernet port double-color LED description
Status Description
Steady green The port is operating at 10 Gbps and a link is present on the port.
Flashing green The port is sending or receiving data at 10 Gbps.
Steady yellow The port is operating at 1 Gbps and a link is present on the port.
Flashing yellow (not 3
Hz)
The port is sending or receiving data at 1 Gbps.
Flashing yellow (3 Hz) The port has failed POST.
Off
• No link is present on the port.
• The port mode LED is operating in PoE mode (applicable to the PoE switch
models.)
The H P 513 0 -24G-2SFP+-2XGT EI and H P 513 0 -24G-PoE+-2SFP+-2XGT (370W) EI switches provide
two single-color LEDs for each 1/10GBase-T autosensing Ethernet port to indicate its operating
status.
Table 26 Description for the two single-color LEDs for the 1/10GBase-T autosensing Ethernet port
LED Status Description
Green LED
Steady on
The port is operating at 10 Gbps and a link is present on the
port.
Flashing The port is sending or receiving data at 10 Gbps.
Off
• No 10 Gbps link is present on the port.
• The port mode LED is operating in PoE mode (applicable to
the PoE switch models.)
Yellow LED
Steady on
The port is operating at 1 Gbps and a link is present on the
port.
Flashing (not 3 Hz) The port is sending or receiving data at 1 Gbps.
Flashing (3 Hz) The port has failed POST.
Off
• No 1 Gbps link is present on the port.
• The port mode LED is operating in PoE mode (applicable to
the PoE switch models.)
100/1000Base-X SFP port LED
The H P 513 0 -24G-SFP-4SFP+ EI switch provides a double-color (green and yellow) LED for each
100/1000Base-X SFP port to show its operating status.
Table 27 100/1000Base-X SFP port LED description
Status Description
Steady green
A transceiver module is installed in the port. The port is operating at 1 Gbps, and
a link is present on the port.
Flashing green The port is sending or receiving data at 1 Gbps.
To Next Page
Loading...
