HP 5130 EI Switch Series User Manual

40
Figure 51 Rear panel
(1) Grounding screw
(2) Power supply slot 1
(3) Power supply slot 2
The H P 513 0 -24G-SFP-4SFP+ EI switch comes with no power supply or filler panel in power supply slot
1 and a filler panel in power supply slot 2. You can install one or two power supplies for the switch as
needed. In Fig u re 51, two PS R 15 0 -A1 AC power supplies are installed. For more information about
installing and removing a power supply, see "Installing and removing a power supply (HP
513 0 -24G-SFP-4SFP+ EI switch)."
Technical specifications
Table 9 Technical specifications for non-PoE switch models
Item
HP
5130-24G-4SF
P+ EI
HP
5130-24G-4SF
P+ EI BR
HP
5130-24G-2
SFP+-2XGT EI
HP
5130-48G-4SF
P+ EI
HP
5130-48G-4SF
P+ EI BR
HP
5130-24G-SF
P-4SFP+ EI
HP
5130-48G-2S
FP+-2XGT EI
Dimensions
(H × W × D)
43.6 × 440 ×
160 mm (1.72 ×
17.32 × 6.30 in)
43.6 × 440 ×
160 mm (1.72
× 17.32 ×
6.30 in)
43.6 × 440 ×
260 mm (1.72 ×
17.32 × 10.24
in)
43.6 × 440 ×
360 mm (1.72
× 17.32 ×
14.17 in)
43.6 × 440 ×
270 mm (1.72
× 17.32 ×
10.63 in)
Weight
≤ 5 kg (11.02
lb)
≤ 3 kg (6.61
lb)
≤ 5 kg (11.02
lb)
≤ 8 kg (17.64
lb)
≤ 5 kg (11.02
lb)
Console
ports
1 1 1 1 1
10/100/10
00Base-T
autosensing
Ethernet
ports
24 24 48
8 (Each and its
corresponding
SFP port form a
combo
interface.)
48
1/10GBase-
T
autosensing
Ethernet
ports
N/A 2 N/A N/A 2
1
2
3

HP 5130 EI Switch Series Specifications

General

Brand	HP
Model	5130 EI Switch Series
Category	Switch
Language	English