62
connecting AC power source, 17
connecting console cable, 21
connecting power cord, 16
connecting RPS, 19
EMI prevention, 3
grounding switch through AC power supply PE
wire, 13
grounding switch with grounding conductor
buried in the earth ground, 13
grounding switch with grounding strip, 11
grounding the switch, 11
power supply installation, 14 , 15
power supply removal, 14 , 15
powering on switch, 22
securing AC power cord for fixed AC power
supply, 17
securing AC power cord for hot-swappable AC
power supply, 17
troubleshooting fixed power supply failure, 31
troubleshooting hot-swappable power supply
failure, 32
troubleshooting power supply failure, 31
electromagnetic interference. See EMI prevention
EMI prevention, 3
emulation (parameter), 22
environment
examining installation site, 2
site cleanliness, 3
site dust concentration, 3
site gas saturation, 3
site humidity, 3
site temperature, 3
examining installation site, 2
F
fiber
laser safety recommendations, 4
fixed AC power supply
securing AC power cord, 17
fixed power supply
failure (troubleshooting), 31
securing AC power cord, 17
flow control (parameter), 22
flowchart of IRF fabric setup, 24
G
garbled terminal display (troubleshooting), 33
gas (installation site), 3
grounding
EMI prevention, 3
grounding conductor buried in the earth ground, 13
grounding strip,
11
switch, 11
switch through AC power supply PE wire, 13
switch with grounding conductor buried in the earth
ground, 13
switch with grounding strip, 11
H
hardware
10/100/1000 Base-T Ethernet port LED technical
specifications, 51
10/100/1000 Base-T Ethernet port technical
specifications, 45
100/1000Base-X SFP port LED technical
specifications, 54
100/1000Base-X SFP port technical specifications,
46
combo interface technical specifications, 49
connecting –48 VDC power source, 18
connecting AC power source, 17
connecting RPS, 19
console port technical specifications, 45
grounding switch, 11
grounding switch through AC power supply PE wire,
13
grounding switch with grounding conductor buried
in the earth ground, 13
grounding switch with grounding strip, 11
port mode LED technical specifications, 50
port technical specifications, 45
power supply installation, 14 , 15
power supply removal, 14 , 15
power supply status LED technical specifications, 50
rack-mounting the switch, 9
RPS status LED technical specifications, 50
securing AC power cord for fixed AC power supply,
17
securing AC power cord for hot-swappable AC
power supply, 17
SFP+ port LED technical specifications, 55
SFP+ port technical specifications, 48
To Next Page
Loading...
Need help?
General