HP 6125XLG - Configuring the Maximum Number of ECMP Routes; Displaying and Maintaining a Routing Table

4
Configuring the maximum number of ECMP routes
This configuration takes effect at next reboot. Make sure the reboot does not impact your network.
To configure the maximum number of ECMP routes:
Ste
p
Command
Remarks
1. Enter system view.
system-view N/A
2. Configure the maximum
number of ECMP routes.
max-ecmp-num number
By default, the maximum
number of ECMP routes is 8.
3. (Optional.) Display the
maximum number of ECMP
routes.
display max-ecmp-num
You can execute the display
command in any view.
Displaying and maintaining a routing table
Execute display commands in any view and reset commands in user view.
Task Command
Display routing table information.
display ip routing-table [ vpn-instance vpn-instance-name ]
[ verbose ]
Display information about routes
permitted by an IPv4 basic ACL.
display ip routing-table [ vpn-instance vpn-instance-name ] acl
acl-number [ verbose ]
Display information about routes to a
specific destination address.
display ip routing-table [ vpn-instance vpn-instance-name ]
ip-address [ mask | mask-length ] [ longer-match ] [ verbose ]
Display information about routes to a
range of destination addresses.
display ip routing-table [ vpn-instance vpn-instance-name ]
ip-address1 to ip-address2 [ verbose ]
Display information about routes
permitted by an IP prefix list.
display ip routing-table [ vpn-instance vpn-instance-name ] prefix-list
prefix-list-name [ verbose ]
Display information about routes
installed by a protocol.
display ip routing-table [ vpn-instance vpn-instance-name ] protocol
protocol [ inactive | verbose ]
Display IPv4 route statistics. display ip routing-table [ vpn-instance vpn-instance-name ] statistics
Clear IPv4 route statistics.
reset ip routing-table statistics protocol [ vpn-instance
vpn-instance-name ] { protocol | all }
Display IPv6 routing table information.
display ipv6 routing-table [ vpn-instance vpn-instance-name ]
[ verbose ]
Display information about routes to an
IPv6 destination address.
display ipv6 routing-table [ vpn-instance vpn-instance-name ]
ipv6-address [ prefix-length ] [ longer-match ] [ verbose ]
Display information about routes
permitted by an IPv6 basic ACL.
display ipv6 routing-table [ vpn-instance vpn-instance-name ] acl
acl6-number [ verbose ]
Display information about routes to a
range of IPv6 destination addresses.
display ipv6 routing-table [ vpn-instance vpn-instance-name ]
ipv6-address1 to ipv6-address2 [ verbose ]
Display information about routes
permitted by an IPv6 prefix list.
display ipv6 routing-table [ vpn-instance vpn-instance-name ]
prefix-list prefix-list-name [ verbose ]