Display IPv6 interface PBR configuration and
statistics.
display ipv6 policy-based-route interface interface-type
interface-number [ slot slot-number ]
Clear IPv6 PBR statistics. reset ipv6 policy-based-route statistics [ policy policy-name ]
Packet type-based IPv6 interface PBR configuration
example
Network requirements
As shown in Figure 83, configure IPv6 PBR on Switch A to forward all TCP packets received on
VLAN-interface 11 to the next hop 1::2. Switch A forwards other IPv6 packets according to the routing
table.
Figure 83 Network diagram
Configuration procedure
1. Configure Switch A:
# Configure RIPng.
<SwitchA> system-view
[SwitchA] ripng 1
[SwitchA-ripng-1] quit
[SwitchA] interface vlan-interface 10
[SwitchA-Vlan-interface10] ipv6 address 1::1 64
To Next Page
Loading...
