Remarks
12. Specify the maximum
number of ECMP routes for
load balancing.
ipv6 maximum load-balancing number
By default, the maximum
number of ECMP routes is
the same as that configured
in the max-ecmp-num
command. For more
information about the
max-ecmp-num command,
see IP Routing Command
Reference.
Configuring BFD for IPv6 IS-IS
Bidirectional forwarding detection (BFD) can quickly detect faults between IPv6 IS-IS neighbors to
improve the convergence speed of IPv6 IS-IS. For more information about BFD, see High Availability
Configuration Guide.
To configure BFD for IPv6 IS-IS:
Ste
Remarks
1. Enter system view.
system-view N/A
2. Enable an IS-IS process and
enter IS-IS view.
isis [ process-id ] [ vpn-instance
vpn-instance-name ]
N/A
3. Configure the NET for the IS-IS
process.
network-entity net By default, no NET is configured.
4. Enable IPv6 for the IS-IS
process.
ipv6 enable
By default, IPv6 for the IS-IS
process is disabled.
5. Return to system view.
quit N/A
6. Enter interface view.
interface interface-type
interface-number
N/A
7. Enable IPv6 for an IS-IS
process.
isis ipv6 enable [ process-id ]
By default, IPv6 is disabled for an
IS-IS process.
8. Enable BFD for IPv6 IS-IS.
isis ipv6 bfd enable
By default, BFD for IPv6 IS-IS is
disabled.
Displaying and maintaining IPv6 IS-IS
Execute display commands in any view. For other display and reset commands, see "Configuring IS-IS."
Task Command
Display information about routes
redistributed by IPv6 IS-IS.
display isis redistribute ipv6 [ ipv6-address mask-length ]
[ level-1 | level-2 ] [ process-id ]
Display IPv6 IS-IS routing information.
display isis route ipv6 [ ipv6-address ] [ [ level-1 | level-2 ] |
verbose ] * [ process-id ]
To Next Page
Loading...
