Problem iPossiblecause Solution
ba_e_es_e_ is too low for
charging to
start.
charge batteries that may be
damaged or over-discharged.
Remove the batteriesfrom the
camera and charge them in an
external battery charger, then try
them in the camera again. If this
does not work, it is likely that one
or moreof the batteries are bad.
Purchasenew NiMH batteries
and try again.
iThe wrong AC Use only the HPAC power
power adapter adapter approved for usewith
is being used. this camera. See Purchosing
The batteries NiMH batteries degrade over
iare damaged time and can fail. If the camera
or bad. detects a problem with the
batteries, it will not start charging
or will stopcharging prematurely.
Purchasenew batteries.
LSB igf_ does not harmlessand should stop after
b k os i ::recognizethat 5-30 minutes.
the bott_ _} there are no
o,e bring batteries
installed.
b_ t_e_ea_ i
no bq_te_'ies i
iestd ed _
76 hp photosmart 730 series user's manual
To Next Page
Loading...
