Line Power Cable
Warning
iv
In accordance with international safety standards, this instrument
has a three-wire power cable. When connected to an appropriate AC
power receptacle, this cable earths the instrument cabinet. The type
of power cable shipped with each instrument depends on the country
of destination. Refer to Figure
Q-l
for the part numbers of the power
cables available.
To avoid the possibility of injury or death, you must observe the
following precautions before switching on the instrument.
• If this instrument is to be energized via an autotransformer for
voltage reduction, ensure that the Common terminai connects to the
earthed pole of the power source.
• Insert the power cable plug only into a socket outlet provided with a
protective earth contact. Do not negate this protective action by the
using an extension cord without a protective conductor.
• Before switching on the instrument, the protective earth terminai of
the instrument must be connected to a protective conductor. You
can do this by using the power cord supplied with the instrument.
• It is prohibited to interrupt the protective earth connection
intentionally.