HP 8153A - Page 222

Test Record
Results of the Function llsst may be tabulated on the 'Ibst Record provided at
the end of the test procedures. It is recommended that you fill out the Ibst
Record and refer to it while doing the test. Since the test limits and setup
information are printed on the Test Record for easy reference, the record can
be also be used as an abbreviated test procedure (if you are familiar with test
procedures). The Test Record can also be used as a permanent record and may
be reproduced without written permission from Hewlett-Packard.
Test Failure
If the HP8153A fails any Function Tbst, return the instrument to the nearest
Hev/lett-Packard Sales/Service Office for repair.
Instruments Specifications
Specifications are the characteristics of the instrument which are certified.
These specifications, listed in Appendix C are the limits against which the
HP8153A can be tested. Appendix C also lists some supplemental characteristics
of the HP8i53A and should be considered as additional information.
Any changes in the specifications due to manufacturing changes, design, or
traceability to the National Institute of Standards and Technology will be
covered in a manual change supplement or revised manual. The specifications
listed here supercede any previously published.
D-2 Function Tests