HP 86140A Series

Index-6
Index
remote interface
automatic ali gnment, 3-3
automatic measurement, 3-4
Remote Setup.... softkey, 3-55
repeat sweep, 3-17
Repeat Sweep softkey, 3-17
repeatability, tuning, 7-3
reproducibility, 7-3
Res BW softkey, 3-15
resolution
bandwidth, 3-15
FWHM, 7-3
restore internal memory, 3-39
Restore Utility screen, 3-39
return loss, connectors, 6-16
returning data, 4-10
Revision.... softkey, 3-42
S
safety information, iii
Save Menu.... softkey, 3-35
Save/Recall functions
deleting a file, 3-38
internal memory backup/restore, 3-39
recalling data, 3-37
recalling in Fast Recall mode, 3-39
saving data, 3-35
saving in Fast Save mode, 3-39
selecting a catalog file, 3-37
Save/Recall menu, 3-34
scale fidelity, 7-4
Scale/Div softkey, 3-9
SCPI commands
equivalent to HP 71450 command, 4-102
standard, 4-2
search between line markers, 3-29
Search Limit softk ey, 3-29
Search Mode.... softkey, 3-25
Select softkey, 3-65
semicolon, use in commands, 4-7
sending common commands, 4-8
SENSe subsystem commands, 4-81
sensitivity, 3-10, 7-4
optimizing, 3-54
See also
sweep time, video bandwidth
Sensitivity softkey, 3-10
service, 6-21
Service Menu.... softkey, 3-48
Set HPIB Address softkey, 3-55
Set Time/Date.... softkey, 3-48
Set Title.... softkey, 3-42
settings conflict error message, 4-9
Setup key, 4-4
Setup panel overview, 3-65
shipment, checking package content, 1-3
shi ppi ng pr ocedur e, 6-21
short form commands, 4-7
Show Notices/Errors/Warnings softkeys, 3-42
signal source, setting, 3-46
Single Sweep softkey, 3-17
softkey panels, 2-11–2-19
software applications, 2-3
SOURce subsystem commands, 4-90
source, single, 3-46
Span softkey, 3-62
span, wavelength, 3-54, 3-62
specifications, 7-2–7-9
Start WL softkey, 3-62
start/stop wavelength, 3-62
static-safe
accessories, 6-7
workstation, 6-8
STATus subsystem commands, 4-91
step size, wavelength, 3-64
Stop WL softkey, 3-62
swabs, cotton, 6-18
sweep
between line markers, 3-29
cycle time, 7-4
indicator light, 3-17
rate, maximum, 7-4
repeat, 3-17
Sweep Limit softkey, 3-29
sweep time, 3-16
See also
sensitivity, video bandwidth
Sweep Time softkey, 3-16
Synch Out softkey, 3-20
synchronous output, 3-20
syntax rules, 4-6–4-10
System functions
active area, moving, 3-47
adding a title, 3-42
automeasure defaults, 3-53
changing the display, 3-43
displaying firmware revision, 3-42
book.book Page 6 Monday, January 31, 2000 10:34 AM