To Next Page

To Previous Page

Using Instrument Functions

Using limit Testing

Delta Frequency

This marker limit test allows you to set marker 1 as a frequency reference

against which marker 2 is limit tested.

1. This limit test requires that you first use marker 1 to determine the

reference frequency: Press

@iiKiS]

1: and then use the front panel

knob or the

(JJ

keys to place marker 1 at the desired place on the

measurement trace. The frequency of marker 1 at this point becomes the

delta reference for this marker limit test.

2. Press

(jjj

Limit Menu,

Limits

3. Use the front panel knob or the

($J

keys to select Delta Freq in

the marker limit test table. Turn this limit function on by pressing the

Limit aft OFF key. Note that the entry in the on/off column of the

table changes to “on.’

Press Edit

Ltiit

(Min#ax> Max Limit and enter the maximum

limit using the front panel keypad and terminating the entry with the

@iEF)

key.

Press Edit

Limit

(MidMax)

Min Limit and enter the minimum limit

using the front panel keypad and terminating the entry with the

[ENTER)

key.

4-40

-1

I-

深圳市盛腾仪器仪表有限公司 Tel:0755-83589391 Fax:0755-83539691 Website: www.Sengt.com

HP 8711C User Manual

Questions and Answers: