HP 8711C User Manual

I
-
I
-
Automating Measurements
Saving Measurement Results
Saving Measurement Results to Disk
The analyzer provides two internal RAM disks and one internal 3.5” floppy
disk to which measurement results can be saved.
For the fastest saves, measurements should be saved to RAM disk. From RAM
disk, they can be copied to the internal floppy disk by pressing (SAVE RECALL)
Fils Utilities Copy All Filets , or using the SCPI command
MMEM:COPY 'MEM:*.*', 'INT:'
or
MMEM:COPY 'RAM:*.*', 'INT:'
The following mass storage specifiers can be used:
Disk
SCPI name
Non-Volatile RAM Disk MEM:fik
Volatile RAM Disk
Internal 3.5’ Disk
RAM : fib
IIiT:fil+
The EIes can also be transferred over HP-IR using the SCPI command
MMEM : TRANsf er. Refer to the “Example Programs” chapter in the
Programmer’s Guide for details.
7-75
I-
深圳市盛腾仪器仪表有限公司 Tel:0755-83589391 Fax:0755-83539691 Website: www.Sengt.com

HP 8711C Specifications

General

Brand	HP
Model	8711C
Category	Measuring Instruments
Language	English