Preset State and Memory Allocation
Peripheral
State
When you preset the analyzer with the (PRESET_)
hardkey
or the SCPI
command “SYST : PRESET”, or cycle power, the settings below are saved in
non-volatile memory and thus are not affected. The analyzer is shipped from
the factory with the settings in the following table. These settings will remain
as shown, until changed.
(BEGIN) Key Settings
User BEGIN menu
IOff
m
Key
Settings
Distance
Units1
Feet
1 Analyzers with Option 100 only
(JEFLF]
Key
Settings
Color options lfor external monitor)
Factory default
(CAL)
Key
Settings
Velocity
facto?
1.0 [speed of light]
12-8
1
Option 100 only
深圳市盛腾仪器仪表有限公司 Tel:0755-83589391 Fax:0755-83539691 Website: www.Sengt.com
To Next Page
Loading...
Need help?
General
