HP 8711C User Manual

I
-
Calibrating for Increased Measurement
Accuracy
Choose an Appropriate Calibration Method
Table 6-1. Calibration Types
Measurement Type
Transmission
Reflection
Fault location1
SAL’
Power
Calibration Choices
Restore Defaults
Response
Response & isolation
Enhanced Response
Restore Defaults
One Port
See your Option 100 User’s Guide Supplement.
See your Option 100 User’s Guide Suppbment.
Autozero
Manuel Zero
Normalize
Conversion Loss
AM Delay*
Autozero
Manual Zero
Normalize
Restore Defaults
Response
Normalize
Unratioed narrowband internal detection
1 Option 100 only
Normalize
2 Options 1DA and 108 only
NOTE
The active calibration will be retained in the analyzer’s memory when power is turned off, and will be
restored when power is turned back on.
NOTE
There is no decrease in sweep speed when a calibration is used.
6-9
深圳市盛腾仪器仪表有限公司 Tel:0755-83589391 Fax:0755-83539691 Website: www.Sengt.com

HP 8711C Specifications

General

Brand	HP
Model	8711C
Category	Measuring Instruments
Language	English