HP 8711C User Manual

I
-
I
-
Calibrating for Increased Measurement
Accuracy
Choose an Appropriate Calibration Method
How to Download
Standards Definitions
NOTE
Calibration kit definitions must be in DOS format. LIF format is not supported for cal kit definitions.
1. Insert the disk with the ca.I standard definitions into the anaIyzer’s built-in
disk drive.
2. Press CSAVE RECALL) and note the first word of the second line on the
screen. If it is not “INT:\” (for internal disk), press S&W% IX&
Intsmal 3 .W Disk Prior Menu .
3. Highlight the fle (CALKIT, in the case of the Example Programs disk).
4. Press Rerall State and wait for the prompt:
Loaded cal kit information for 4 calibration standards
Recall of cal kit from CALKIT complete
5. Press [CAL) Cal Kit UWW Defined.
I
NOTE
Cal kit coefficients are displayed in the cal kit block of the operating parameters screen; press
(SYSTEM OPTIONS) Operating Param6mxm Mext Smewn .
6-18
I-
深圳市盛腾仪器仪表有限公司 Tel:0755-83589391 Fax:0755-83539691 Website: www.Sengt.com

HP 8711C Specifications

General

Brand	HP
Model	8711C
Category	Measuring Instruments
Language	English