I
-
I
-
Enabling/Disabling Display Features
.........
Modifying Display Annotation
.............
Expanding the Displayed Measurement
........
Saving and Recalling Measurement Results .......
Saving Instrument Data
..............
To Recall from a Disk or Internal Memory
......
Other File Utilities
................
To Use Directory Utilities
.............
Formatting a Floppy Disk
.............
Connecting and Configuring Printers and Plotters
....
Select a Compatible Printer or Plotter
........
Select an Appropriate Interface Cable
........
Connect the Printer or Plotter
...........
Configure the Hardcopy Port
............
Define the Printer or Plotter Settings
........
Printing and Plotting Measurement Results .......
To Select the Copy Port
..............
Define the Output
.................
Using a Keyboard
..................
To Connect the Keyboard
.............
To Use the Keyboard to Edit
............
Front Panel Control Using a Keyboard
........
Using an External VGA Monitor ...........
Customizing Color on an External Monitor
......
Synchronizing and Positioning the Display
......
5. Optimizing Measurements
Increasing Sweep Speed ...............
To Increase the Start Frequency
...........
To Set the Sweep Time to AUTO Mode
.......
To Widen the System Bandwidth
..........
To Reduce the Amount of Averaging
.........
To Reduce the Number of Measurement Points ....
To View a Single Measurement Channel
.......
To Turn Off Alternate Sweep
............
To Turn Off Markers and Marker Tracking
......
To Turn Off Spur Avoidance
............
To Avoid Frequency Bandcrossings by Minimizing the
Span (HP
8713C
only)
.............
Increasing Network Analyzer Dynamic Range ......
To Increase the Receiver Input Power
........
4-52
4-54
4-59
4-62
4-64
4-68
4-69
4-72
4-74
4-75
4-76
4-77
4-78
4-79
4-82
4-87
4-88
4-89
4-93
4-93
4-94
4-95
4-97
4-98
4-100
5-3
5-3
5-4
5-4
5-5
5-5
5-6
5-7
5-7
5-8
5-9
5-10
5-10
Contents-3
深圳市盛腾仪器仪表有限公司 Tel:0755-83589391 Fax:0755-83539691 Website: www.Sengt.com
To Next Page
Loading...
Need help?
General
