HP 8753E - Page 146

PARAL<GPIOICPY>
Selects use of the parallel port: for
general purpose I/O (GPIO) or for the copy
(CPY) function.
PARAOUT[D]
Programs all GPIO output bits at once.
Range: 0 to 255.
PAUS
PCB[D]
Inserts a pause into a sequence.
Same as ADDRCONT. Indicates where
control will be returned after a pass
control. Range: 0 to 30.
These 12 commands select the color for printing the indicated display
feature where <COLOR> is one of the following colors: white, cyan,
magenta, blue, yellow, green, red, or black.
PCOLDATAl<COLOR>
Channel 1 data.
PCOLDATA2<COLOR>
Channel 2 data.
PCOLDATA3<COLOR>
Channel 3 data.
PCOLDATA4<COLOR>
Channel 4 data.
PCOLMEMOl<COLOR>
Channel 1 memory.
PCOLMEMOB<COLQR>
Channel 2 memory.
PCOLMEMOS<COLOR>
Channel 3 memory.
PCOLMEM04<COLOR>
Channel 4 memory.
PCOLGRAT<COLOR>
Graticule.
PCOLREFL<COLOR>
Reference line color.
PCOLTEXT<COLOR>
Displays text.
PCOIJVARN<COLOR>
Warning text.
PDATA<ONIOFF>
Selects whether trace data is plotted.
HP-IB Programming and Command Reference Guide
l- 139