HP 8753E - Page 156

SELL[D]
SELMAXPT[D]
SELMINPT[D]
Selects the learn string revision (LRN) or
OUTPLEAS, INPULEAS to be used by the
analyzer. The valid parameters are:
0: Defaults to current revision.
201:
Revision 8753B
2.01
300:
Revision 8753B
3.00
401:
Revision 8753C
4.01
402:
Revision 8753C
4.02
412:
Revision 8753C
4.12
413:
Revision 8753C
4.13
500:
Revision 8753D
5.00
520:
Revision 8753D
5.20
526:
Revision 8753D
5.26
534:
Revision 8753D
5.34
536:
Revision 8753D
5.36
538:
Revision 8753D
5.38
540:
Revision 8753D
5.40
542:
Revision 8753D
5.42
546:
Revision 8753D
5.46
548:
Revision 8753D
5.48
612:
Revision 8753D
6.12
710:
Revision 87533
7.10
Selects the last point number
in the range of points that the
OUTPDATR command will report.
Range: 0 to the number of pin&s minus 1.
Selects the first point number
in the range of points that the
OUTPDATR command will report.
Range: 0 to the number ofpoints minus 1.
HP-IB Programmi
ng and Command Reference Guide
1-149