Model
8901B
Operation
Store/Recall
FUNCTIONS
STORE, RECALL
DESCRIPTION
The Modulation Analyzer can store a complete instrument
state
(including all front-panel functions and
most Special bctions)
in
any of
its
eight storage registers. The stored
data
is
retained in non-volatile
memory when the instrument
is
off
even when the power cord
is
removed. Any of these stored states
can then be re-initiated.
PROCEDURE
To store the current instrument state, select STORE (Blue Key,
7).
Then key in a register number
(1
through
8).
To recall a previously-stored instrument
state,
select RECALL (Blue Key,
8).
Then key in the desired
register number
(1
through
8).
HP-IB
PROGRAM CODES
RECALL
=
RC
STORE
=
TR
COMMENTS
Regarding storage of RF power calibration factors:
0
The current reference calibration factor and the
frequency/calibration-fac-x
pair can be stored.
0
Manual calibration factors can be stored.
0
The table of calibration factors cannot be stored with this function, but
two
tables of calibration
factors can be separately stored in the instrument’s non-volatile memory, (Refer
to
RF
Power
under “Comments” on page
3-79.)
Store/Recall
3-223
To Next Page
Loading...
Need help?
General
