Regulatory Information (Updated March
1999)
To
prevent electrical shock, disconnect instrument from mains (line)
before cleaning. Use a dry cloth or one slightly dampened with water
to clean the external case parts.
Do
not attempt to clean internally.
Ventilation Requirements: When installing the product in a cabinet,
the convection into and out
of
the product must not be restricted.
The ambient temperature (outside the cabinet) must be less than the
maximum operating temperature of the product by
4"
C
for every
100
watts dissipated in the cabinet.
If
the total power dissipated in the
cabinet is greater than
800
watts, then forced convection
must
be
used.
Product Markings
CE
-
the CE mark
is
a registered trademark
of
the European Community.
A
CE mark
accompanied by a year indicated the year the design was proven.
CSA
-
the
CSA
mark
is
a registered trademark
of
the Canadian Standards Association.
4
Chapter
1
To Next Page
Loading...
