230
S:\HP8924C\USRGUIDE\BOOK\chapters\memcard.fb
Chapter 5, Memory Cards/Mass Storage
Using Memory Cards
Setting the Write-Protect Switch
The SRAM memory card’s write-protect switch lets the user secure its contents
from being overwritten or erased. The switch has two positions (see
figure 33 ):
• Read-write – The memory-card contents can be changed or erased, and new files may
written on the card.
• Read-only – The memory-card contents can be read by the Test Set, but cannot be
changed or erased.
Figure 33 Setting the SRAM Write-Protect Switch
To Next Page
Loading...
