257
S:\HP8924C\USRGUIDE\BOOK\CHAPTERS\ibasic.fb
Chapter 6, IBASIC Controller
Interfacing to the IBASIC Controller using Serial Ports
11. Terminal emulation: VT-100
Duplex: FULL
Flow Control: XON/XOFF
CR translation (in): CR
CR translation (out): CR
BS translation: NON-DEST
BS key definition: BS
Line wrap: ON
Scroll: ON
Break length (ms): 350
Enquiry (CNTL-E): OFF
12. Press Esc to exit Terminal Setup back to the Setup Menu.
13. Enter the number 4 for General Setup.
Translate Table: OFF
Alarm sound: OFF
Alarm time (secs): 1
Aborted downloads: KEEP
14. Press Esc to exit General Setup back to the Setup Menu.
15. On the Setup Menu, press S to save your entries.
16. Press Esc to exit the Setup Menu.
17. Press Alt+X to exit ProComm back to MS-DOS.
Setting Up HP AdvanceLink (HP 68333F Version B.02.00) on your PC
HP
AdvanceLink is a software program which allows PCs to be used as an
alphanumeric or graphics terminal. It can also automate terminal and file-transfer
functions. The version described will work with PCs with the MS-DOS or
PC-DOS operating systems. (AdvanceLink for Windows is also available, and
configuration is very similar).
Running AdvanceLink in MSDOS
1. Press the Tab key to move from one field to the next, which also accepts the displayed
choice.
2. Press the NEXT CHOICE and PREVIOUS CHOICE keys to move among the choices
for a particular field.
To Next Page
Loading...
