HP A-MSR900 Series - Powering on the Router

22
Powering on the router
W
ARNING!
Before powering on the router, locate the power source switch so that you can cut off power promptly
in case of an emergency.
• Switch on the power source
• Turn on the power switch on the router
Startup process
After power-on, the router initializes its memory, and then runs the extended BootWare. The console
terminal screen displays the following:
System is starting...
Do you want to check SDRAM? [Y/N]
Booting Normal Extend BootWare........
The Extend BootWare is self-decompressing.....................
Done!
****************************************************************************
* *
* HP A-MSR900 BootWare, Version 2.24 *
* *
****************************************************************************
Copyright (c) 2010-2011 Hewlett-Packard Development Company, L.P.
Compiled Date : Feb 16 2011
CPU Type : MPC8323E
CPU L1 Cache : 16KB
CPU Clock Speed : 266MHz
Memory Type : DDR SDRAM
Memory Size : 256MB
Memory Speed : 132MHz
BootWare Size : 1024KB
CPLD Version : 1.0
PCB Version : 3.0
BootWare Validating...
Press Ctrl+B to enter extended boot menu...
Starting to get the main application file--flash0:/mainmsr201x.bin!.............
............................................................................
............................................................................
....
The main application file is self-decompressing.............................
.......
Done!