HP A-MSR900 Series - Power-on Check; Configuring Basic Settings for the Router

23
System application is starting...
User interface con0 is available.
Press ENTER to get started.
Press Enter and the system displays the following prompt:
<HP>
This prompt indicates that the router has entered user view and is ready to configure.
Power-on check
After powering on the router, check the following items:
• The LEDs on the front panel are normal, as described in Table 6.
T
he following table describes normal LED status after the router is powered on.
Table 6 Normal LED status after the router is powered on
LED Status Descri
p
tion
PWR Steady green
The power supply is working
properly.
SYS Flashing green slowly The system is working properly.
• The console terminal displays information correctly. You can see the startup window on the local
console terminal. For more information, see “Startup process.”
• After completing the POST, the system prompts you to press Enter. When the command line prompt
appears, the router is ready to configure.
Configuring basic settings for the router
After the router is powered on for the first time, configure basic settings for the router. For more
information, see HP A-MSR Router Series Fundamentals Configuration Guide and HP A-MSR Router Series
Fundamentals Command Reference.