HP C2488A User Manual

Mode Select, Mode Sense
Page Code 09H, Peripheral Device Parameters (Savable Page)
Bit
Byte
7 6 5
I
4
I
3
I
2
I
1
I
0
00 PS
Reserved
Page Code = 09H
01
Page Length In Bytes = OAH
02-03
(MSB=02)
Interface Identifier
(LSB=03)
04-07
Reserved
08-10
(MSB=08)
Interface Specific Parameters
(LSB=lO)
11 Reserved
Page 09H Parameter values
Parameter
Default Changeable Allowable Range
Values Values
(HEX)
Interface Identifier 8000
No 8000 = SCSI
Interface Specific Parameters 000000 Yes
•
Byte 8, bit 5:
o = copy drive error and fault log from
RAM to media on error only
1 = do not copy log; log contents will be
lost on power cycle or bus reset
• Byte 8, bit 6: Auto-head alignment control
o = enable automatic head alignments
1 = disable automatic head alignments
and execute them on Rezero Unit
commands, check bit 7
• Byte 8, bit 7: Rezero Unit command head
alignment control
o = align current head
1 = always align all heads regardless of
bit 6 state
• All other bit positions are reserved and
should be set to zero (0)
DRAFT SCSI Command Descriptions A-29
1/18/93
09:58

HP C2488A Specifications

General

Brand	HP
Model	C2488A
Category	Storage
Language	English