HP Chromebook x360 14c User Manual

3. Disconnect the cable from the ZIF connector on the touchpad (3). You need to move this cable so that
you can remove the speaker cable that routes under it.
4. Remove the speaker cable from the clips in the computer chassis (4).
5. Remove the two Phillips M2.0 × 5.0 screws (5) that secure the speakers to the computer.
NOTE: When installing the speakers, be sure that the gaskets are correctly installed in the speaker
screw holes (6).
6. Remove the speakers from the computer (7) .
Reverse this procedure to install the speakers.
Touchpad
To remove the touchpad, use this procedure and illustration.
Table
5-4 Touchpad description and part number
Description Spare part number
Touchpad M00314-001
Touchpad cable M00308-001
Before removing the touchpad, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 21).
2. Remove the bottom cover (Bottom cover on page 21).
3. Remove the battery (see Battery on page 23).
Component replacement procedures 25

HP Chromebook x360 14c Specifications

General

Display Size	14 inches
Resolution	1920 x 1080 pixels
Processor	Intel Core i3-10110U
RAM	8 GB
Storage	64 GB eMMC
Operating System	Chrome OS
Graphics	Intel UHD Graphics
Convertible	Yes
Color	Mineral Silver
Battery	3-cell, Li-ion
Display Type	IPS
Ports	2 x USB-C, 1 x USB-A, 1 x headphone/microphone combo
Wireless	Bluetooth 5.0